Skoda Tuning Shop — Page 134

Sort
No sorting
Filter
Not selected
Filter by
Product Categories
Цена
от до USD
Universal product
Article: 70710603128
price 16 USD
In stock
-
+
ULTIMATE SQL combines sound...
ULTIMATE SQL combines sound-absorbing products made of high-quality acoustic polyurethane foams with special features such as reinforcement, flame resistance, and lamination for structural use. Suitable for manufacturers, installation centers, and DIY projects.
Laminated soundproof sheet Ultimate U-Power overtone 10mm (75x100cm)
Universal product
Article: 70710603092
price 28 USD
In stock
-
+
U-POWER OVERTONE 10L – soun...
U-POWER OVERTONE 10L – sound-absorbing and sealing material based on special polyurethane foams, coated with a sound-transparent elastic latex layer that protects against moisture. Even at 7 mm thickness, it rivals materials twice as thick! Designed for maximum sound quality in audio installations. Up to 10 times more effective than standard foams (sound absorption up to 95%). Features slow recovery (memory effect), odorless, non-staining, absorbs less than 30% moisture and dries quickly.
Universal product
Article: 70710602549
price 22 USD
In stock
-
+
noise-absorbing and sealing...
noise-absorbing and sealing material based on special polyurethane foams. It has a pyramidal front surface, which significantly increases the effective area and allows better absorption and dispersion of noise in a wide frequency range. Similar materials are used in the equipment of recording studios. It is used: roof, door cards, curtains, interior trim.
Universal product
Article: 70710602947
price 30 USD
In stock
-
+
Sound-absorbing sheet ULTIM...
Sound-absorbing sheet ULTIMATE SQL A 15NET (Sound Quality Lab series) with reinforced adhesive layer. A new generation of sound-absorbing plates based on acoustic polyurethane foam. The reinforced adhesive layer allows you to mount the material on metal and plastic surfaces without stretching or deformation. • has a memory effect; • the semi-closed structure of the cavities provides a noise-absorbing effect, as well as high-quality noise and thermal insulation. • operating frequency range: 300-4000 Hz. Thickness - 15 mm Weight - 680 g/ m². Sheet size - 750 × 1000 mm Acoustic noise reduction - 80%
Laminated Soundproof Sheet Ultimate U-Power Overtone 7mm (75x100cm)
Universal product
Article: 70710602550
price 30 USD
In stock
-
+
U-POWER OVERTONE 7L is a no...
U-POWER OVERTONE 7L is a noise-absorbing and sealing material based on special polyurethane foams, covered with a sound-transparent elastic latex layer that protects the product from moisture. Even at its thickness of 7 mm, it competes with analogues twice as thick! U-POWER OVERTONE 7L is used to achieve the maximum high sound quality result when installing acoustics. 10 times more effective than standard foams (sound absorption coefficient up to 95%). The material has the ability to slowly recover after compression (memory effect), does not emit odors and does not stain adjacent surfaces. Absorbs moisture less than 30% by mass and dries quickly.
Universal product
Article: 70710602551
price 20 USD
In stock
-
+
ULTIMATE SQL 5 L Sound Qual...
ULTIMATE SQL 5 L Sound Quality Lab A new generation of sound-absorbing plates based on acoustic foam. • has a memory effect; • is covered with a waterproof PU film • sealing and anti-squeak properties • the semi-closed structure of the cavities provides a sound-absorbing effect, as well as high-quality sound and thermal insulation. • operating frequency range: 500-4000 Hz. Thickness - 5 mm Weight - 350 g/ m2 Sheet size - 750 × 1000 mm
Universal product
Article: 70710602552
price 22 USD
In stock
-
+
ULTIMATE SQL NFF 15 Sound Q...
ULTIMATE SQL NFF 15 Sound Quality Lab Non flam Foam A new generation of noise-absorbing plates based on non-flammable acoustic polyurethane foam. • does not support combustion, does not burn; the flammability test can be viewed here • the semi-closed structure of the cavities provides a noise-absorbing effect, as well as high-quality noise and thermal insulation • operating frequency range: 350-4000 Hz. Thickness - 15 mm Weight - 550 g/ m² Sheet size - 750 × 1000 mm Acoustic noise reduction - 75%
Universal product
Article: 70710602404
price 40 USD
In stock
-
+
ULTIMATE Sound Absorber PU...
ULTIMATE Sound Absorber PU 15mm noise-absorbing material, based on special polyurethane foams. Material with a developed pyramidal front surface, covered with a sound-transparent elastic latex layer that protects the product from moisture. Has the ability to absorb and dissipate noise in a wide frequency range. The highest efficiency is from 300 to 5000 Hz. It is used to achieve the maximum high sound quality result when installing acoustics. 10 times more effective than standard foam rubbers (sound absorption coefficient up to 95%). The material has the ability to slowly recover after compression (memory effect), does not emit odor and does not stain adjacent surfaces. Application: roof, door cards, panels, interior trim, bottom.

For Skoda, the DD Tuning catalog has accessories for every generation: Octavia Tour (A4) 1996–2010, Octavia A5 2006–2013, A7 2013–2019 and A8 from 2020, as well as Fabia, Superb, Rapid, Yeti, Kodiaq, Karoq, Kamiq and other models. For the Octavia Tour, it’s primarily interior tuning (dash trims, gear shift boot, floor mats), winter grille covers, a rear visor above the liftback’s rear glass; for A5, A7 and A8, body kits are added — lip trims, diffusers, spoilers — as well as stainless-steel chrome trims.

How to tell Octavia Tour, A5, A7 and A8 apart before ordering?

GenerationBodyYearsWhat mattersPage
Octavia I TourA4 (1U)1996–2010lower winter cover — only for the bumper from 2000Octavia I Tour A4 1996–2010
Octavia IIA5 (1Z) pre-facelift2006–2010headlights are more rectangular; its own winter covers and mud flapsOctavia II A5 2006–2010
Octavia IIA5 (1Z) facelift2010–2013headlights are more elongated; for 2009–2010, verify the front-end photo or VINOctavia II A5 2010–2013
Octavia IIIA7 (5E)2013–2019before the 2017 facelift the headlights are single-piece, after — split; grille covers are separate for 2013–2017 and 2017–2020Octavia III A7 2013–2019
Octavia IVA8 (NX)2020–new generation, A7 parts don’t fitOctavia IV A8 2020–

Tour is A4, not A5: grilles, rear visor, gear shift boot and floor mats are different. If the rear glass lifts together with the trunk lid, it’s a liftback; for the station wagon (Combi), rear window visors, a rear bumper protector and a trunk mat are selected separately.

What do people install on Octavia Tour, A5 and A7 most often?

  • Octavia Tour.Interior tuning: dash trims for cars from 2000 and a leather gear shift boot for the OEM frame. Winter covers — upper near the emblem and lower under the plate, installed over the factory grille without drilling. The rear visor is only for the liftback; it should be mounted with adhesive sealant, not just tape. There are no model-specific mud flaps for Tour — only universal ones sold as a pair; the lip and diffuser are also universal. There is an article about DIY Octavia Tour tuning.
  • Octavia A5. Winter covers are separate for 2006–2010 and 2010–2013; rear bumper protector — separate for liftback and wagon, standard and RS bumper; Niken Luxury armrest, model-specific mud flaps (4 pcs) for the factory mounting points, floor mats with a rear bridge.
  • Octavia A7.Lip trims, diffusers and spoilers — different for RS and standard bumper; winter covers 2013–2017 and 2017–2020; window visors separate for LiftBack and SW; door sill trims in 8 pieces.

What Skoda accessory groups are in the catalog?

What’s available for other Skoda models?

Separate pages: Superb 2001–2009, 2009–2015, 2015–2024, 2024–; Fabia 2000–2007, 2007–2014, 2014–2021, 2021–; Kodiaq 2016–2023 and 2023–, Karoq, Kamiq; Yeti — bull bars; Rapid, Roomster, Scala.

What should you pay attention to before ordering?

  • Transition years — Octavia A5 2009–2010, A7 2017, Superb 2008 and 2013: the year in the documents doesn’t determine the front end; send the manager a photo of the car or the VIN.
  • Upper and lower winter covers are separate items; scratches are less visible on matte. For cars with an adaptive cruise radar, please уточнюйте the compatibility of the lower one.
  • Wheel center caps are selected by the outer and mounting diameter of the old cap (56/52, 59/55, 60/56, 65/56 mm), the emblem — by the original number and diameter; the front one on most models is 89 mm.

The description was prepared with the help of AI based on an analysis of over 1 million phone conversations between DD Tuning managers and customers, as well as the company knowledge base. We collected the questions customers ask most often and answers verified in practice.

Shipping to EU

Wholesale and retail

Own warehouse

Login to the site
Кредит
Покупка частинами monobank

Опис продукту

  1. Наявність кредитної картки від Монобанку
  2. Доступний кредитний ліміт за сервісом "Покупка частинами monobank"
  3. Перший платіж буде списаний у день оформлення

Подарунки не надаються при оформленні покупки у кредит під 0,01% або при покупці частинами.

Request a callback
Notify when available