Front and Rear Car Bumpers

In the “Bumpers” section you’ll find front and rear bumpers for specific makes and models: tuning and facelift plastic bumpers (mostly polypropylene) ready for painting, OEM bumpers, carbon bumpers, and reinforced Dakar metal bumpers for pickups, as well as mounting hardware for them. A bumper can be basic (a plastic shell without grilles and blanking caps) or complete, and every item is tied to the make, generation, and production years.

There are no universal bumpers here, so the easiest way to start is with the “Make / Model” filter. The most searched bumpers are for Toyota Land Cruiser 200, Land Cruiser Prado 150, and Lexus LX570.

What bumpers are available in the catalog

• Bumpers in a different design — AMG, M-Sport and M-Performance, RS-Style, Maybach, F-Sport, Autobiography, SVA and SVO styles. For example, an X3M-style front bumper for BMW X3 G01 or an AMG S63-style bumper for Mercedes S-class W223. For convenience, there are separate sections for front and rear bumpers.
• Facelift bumpers — to give an older model year the look of a newer version: Lexus ES 2010–2012 in a 2019 design, Toyota Camry 2006–2011 in Lexus style. If the headlights and grille change along with the bumper, see facelift kits.
• OEM bumpers — for example, a front Mercedes G-class W463 2018–2024 bumper in white and black, or a rear Nissan Patrol Y62 / Armada bumper.
• Carbon bumpers — for Mercedes Vito/V-class W447, Nissan GT-R, and Mercedes G-class W465 (BRB 800).
• Reinforced Dakar metal bumpers for pickups — Toyota Hilux, Mitsubishi L200, Nissan Navara, Ford Ranger, Volkswagen Amarok; some front versions include underbody/skid plate protection. More off-road solutions are in the off-road bumpers section.
• Mounting hardware and components — brackets, guides, retainers, absorbers (reinforcements), air ducts, bumper grilles and moldings. They can be ordered separately, without the bumper itself.

How a “bare” bumper differs from a complete bumper

• Basic bumper — a plastic shell without grilles, blanking caps, and decorative inserts. These parts are transferred from the stock bumper or purchased separately.
• Complete bumper (assembled) — already comes with grilles and other elements listed in the product title.
• With headlights or without — for some models these are different versions. For example, Lexus RX 2009–2015 front bumpers: the 2009–2012 version comes with headlights, while the 2012–2015 version does not.

The exact contents are shown in the photos and in the “Package contents” field on the product page. If it says “see photo” and something is unclear, уточніть with the manager before placing the order.

How to avoid compatibility mistakes

• Years and facelift. Within one generation, pre- and post-update bumpers are different, so the years are shown in brackets in the title — for example, an M-Tech front bumper for BMW 5 G30 “for 2017–2020”.
• Body type. For Audi A5, RS-Style rear bumpers are available separately for the 2-door and 4-door versions.
• Vehicle trim. For Range Rover Sport 2005–2013, front bumper inserts differ for SE/HSE/Supercharged and Autobiography versions.
• Matching front and rear style. Technically you can install a new front bumper and keep the old rear, but the car will look unfinished — when changing the design, it’s better to buy a matching pair.
• Market version. European and US versions of the same model may differ in mounts, license plate area, and fog light cutouts, so if your car was imported from the USA, check compatibility separately.

If you’re unsure, send the manager your VIN and photos of the car — compatibility will be verified before payment. Photos are especially important if the bumper has already been replaced after a repair: in that case, the VIN alone is not enough.

Will the sensors, camera, and washers be retained?

Before ordering, list what’s installed in your stock bumper: parking sensors, front camera, adaptive cruise control radar, headlight washers, fog lights. Check the photos and product title to make sure the new part has provisions for them. Sensor holes are often only marked — they are cut during prep for painting, and the sensors and brackets are transferred from the old bumper. For a facelift, different brackets and guides may be required — it’s best to have this work done by a professional.

What bumpers are made of, and do they need painting?

Plastic bumpers are mostly made of polypropylene (PP) — it’s more flexible and handles impacts better — and are supplied ready for painting (before painting, PP is primed with a PP adhesion promoter). They are painted to match the body color before installation and fitted in the factory mounting points. The correct process is to test-fit on the car before painting: check symmetry, mounting points, and gaps with the fenders, headlights, and hood, and only then prep and paint the part. Color should be matched to the actual body, not the paint code — this gives a better shade match. Dakar bumpers are metal, with a black finish. Manufacturers include GBT, 1234 Upgrade, GT Tuning, Omsa Line, and DDCarbon. You can install a bumper at the DD Tuning network of certified service centers — the manager will suggest the nearest one.

What to combine it with

To complete the look, pair the bumper with front bumper lip spoilers, rear diffusers, rear bumper protectors, and radiator grilles. If you plan to replace both bumpers together with side skirts, check body kit sets.

Description prepared with the help of AI based on the analysis of over 1 million phone calls between DD Tuning managers and customers, and the company knowledge base. We collected the questions customers ask most often and practical, proven answers.