Renault Master 2011-2023 Window Deflectors (2 pcs, HIC)

HIC wind deflectors (2 pcs) — stick-on deflectors for the front side windows for Renault Master 2011–2023: a pair for the driver and passenger doors made of tinted polycarbonate, which is glued on the outside of the door frame. The set includes 2 overlays with double-sided tape, manufacturer — HIC (Taiwan); no drilling is required.

Which Renault Master do these wind deflectors fit?

The wind deflectors are designed for the third-generation Master produced in 2011–2023. The front end was updated several times over these years (2010–2014, 2015–2019 and from 2019/2020), but for wind deflectors the doors matter, not the front end, so there is one set for the whole period. It’s different with the hood deflector — it is selected to match your front end. These wind deflectors do not fit the Master II produced up to 2010: its doors are different.

If your Master is a 2024 model year, first determine the generation: that year both the old-design Master and a new generation with a different body were sold, for which compatibility of these wind deflectors is not stated. Compare the doors with the product photos or send a photo of the doors to the manager — the fitment will be confirmed before shipping.

What are they for and what are they made of?

Wind deflectors let you keep the side window slightly open in the rain and while parked: water and spray run down the deflector instead of getting into the cabin. The overlay follows the upper edge of the window opening and part of the front edge of the window. Material — polycarbonate, base color in the specs — black: the plastic is tinted and semi-transparent, so you can see through it from inside. The wind deflector mounts to the door frame, not to the glass, so the window goes down and up as usual.

Stick-on or in-channel: how do the sets for Master differ?

For Master 2011–2023 there are four wind deflector sets on the site, all — front pairs of 2 pcs:

Stick-on ones (also called “self-adhesive” or “on tape”) are glued on the outside to the door frame, while in-channel ones are inserted into the groove under the rubber window weatherstrip. There is no universally better type: stick-on ones do not go into the groove and do not touch the glass, in-channel ones hold in the factory groove. Choose the mounting type that is more convenient for you, and compare the shape and tint using the photos of each set.

How to install HIC stick-on wind deflectors?

1. Test-fit the wind deflector to the door frame without removing the protective strip from the tape, and center it along the window opening.
2. Clean, dry, and degrease the section of the frame where the tape will sit.
3. Apply in a warm, dry place: remove the protective strip, position the wind deflector without tension, and press firmly along the entire length.
4. If there is a transport film on the plastic, remove it only after installation.

The tape is already applied to the overlays; no additional glue is needed. Wind deflectors are not glued to the glass.

What else to choose for Master 2011–2023?

A hood deflector reduces the risk of chips and insect build-up on the hood — it is chosen by the front end: EuroCap 2010–2014, EuroCap 2015–2019 or EuroCap 2020+. Above the windshield they install a V2 visor on a metal frame. All wind deflectors for this model are collected on the Renault Master window deflectors page, the rest of the deflectors — in the Renault Master 2011–2023 deflectors section, other accessories — on the Renault Master 2011–2023 tuning page, and wind deflectors for other vehicles — in the window deflectors catalog.

Description prepared with the help of AI based on an analysis of over 1 million phone conversations between DD Tuning managers and customers and the company knowledge base. We collected the questions customers ask most often and the answers verified in practice.