Renault Master 2011-2023 Hood Deflector 2020+ (EuroCap)

Description

EuroCap hood deflector 2020+ — a black polycarbonate “bug shield” for Renault Master III after the second front-end update (2019/2020–2023): with new headlights and grille. It is fastened with clips or screws from the installation kit; for the early Master 2010–2014 and for the 2015–2019 facelift, different deflectors are required, and it is not installed on the new-generation Master from 2024.

All three variants are collected on the page Renault Master 2011–2023 hood deflectors. The deflector takes the hit from small stones and insects flying into the front edge of the hood and reduces the number of paint chips, but it does not provide complete protection for the hood and windshield.

How to understand that your Master needs the 2020+ deflector specifically?

Master III was produced with three different front ends, and the deflector is selected by the front end, not by the year in the registration documents. The year 2019 is transitional: vehicles from that year are found both with the first-facelift front end and already with the updated one.

• Headlights and grille — if the vehicle already has the new headlights and the second-update grille, you need the 2020+ version, even when the documents say 2019.
• 2015–2019 front end — a large Renault diamond in the grille and first-facelift headlights; there is a separate deflector for it in the catalog.
• Master from 2024 — this is a new generation with a different hood. If the vehicle is a 2024 model year but has the old design, compare the front end by photo.
• Photo — if in doubt, send the manager a front-on photo of the front end: by the headlights and grille the variant is determined accurately, while the VIN or model year does not confirm accessory compatibility.

What is the deflector made of and what is included in the kit?

• Manufacturer — EuroCap, Turkey.
• Material — polycarbonate, color black.
• Package contents — hood deflector and installation kit.
• Packaging — box 180 × 60 × 10 cm.

The deflector comes in a tightly applied transparent protective film. Scratches or scuffs on it are not a product defect: after removing the film, the surface is new.

How is the hood deflector installed on Master 2020+?

Installation method per the product card — clips or screws from the installation kit, without glue. Before installation, the front edge of the hood is washed and dried so that no sand remains under the fasteners. The deflector is positioned, centered relative to the emblem and the symmetry of the edges above the headlights is checked, and only then are the fasteners secured. After installation, the protective film is removed and it is checked that the hood closes freely. Finally, follow the instructions included with the kit. Spare fasteners are available on the page deflector fasteners for Renault Master. You can also have it installed at the network of certified DD Tuning service centers — the manager will suggest the nearest one.

How to care for the deflector?

Wash the deflector together with the vehicle using regular car shampoo and a soft sponge; abrasive compounds and stiff brushes leave dull marks on the plastic. From time to time it is useful to rinse the space between the deflector and the hood from sand, and in winter to brush off snow carefully without prying up the edge of the trim.

What to pair with on Renault Master

• Side window deflectors for Renault Master 2011–2023 — front pair for the doors.
• Windshield visor — an accessory above the glass to pair with the hood deflector.
• Mud flaps — protect the sills and doors from dirt from the wheels.
• Other accessories — on the page Renault Master 2011–2023. We ship orders with Nova Poshta.

The description was prepared with the help of AI based on the analysis of over 1 million phone calls between DD Tuning managers and customers and the company's knowledge base. We collected the questions customers ask most often and answers verified in practice.

Installing the hood deflector