Universal Front Lip Niken Black (ABS)

The universal Niken Black front lip spoiler is a lip (also called a lip, splitter, or skirt) that is glued under the lower edge of the front bumper and visually makes the front of the car look lower and sportier. It is not tied to a specific brand or body style: it is selected by the bumper’s dimensions and shape. Material: ABS plastic, color: black, manufacturer according to the product card: DPT (Turkey).

What it consists of and the dimensions

The lip is sectional. In the product photo you can see two side parts that wrap around the bumper corners, a central part, and a lower insert. In the Black version, all elements, including the insert, are black. Dimensions according to the card:

• length — 169 cm;
• width — 47 cm;
• height — 4 cm;
• length of the lower (colored) insert — 74.5 cm.

Thanks to the sections, the lip is easier to fit to the bumper’s curve than a one-piece strip, and if the bumper is narrower, it is trimmed to the width of your car.

How to choose it for your bumper

In the product card the lip is marked as limited universal: it fits many bumpers, but not just any, and usually requires slight adjustment. To make sure the size fits exactly, before ordering:

• measure the lower edge of the bumper along the arc from corner to corner, not in a straight line, and compare it with the 169 cm length;
• look at the shape of the corners: the side sections have a bend, so on a very rounded or, наоборот, flat bumper, test-fit them especially carefully;
• check whether there is a flat surface underneath that the adhesive will bond to well;
• keep in mind that the lip lowers the bottom of the bumper and reduces ground clearance — this is important for low cars, high curbs, and steep driveways.

A longer lip can be trimmed, but you won’t be able to extend one that’s too short. If your bumper is wider, take a look at the longer universal lip DPT Black V-2 with a length of 182 cm.

Installation

The installation type in the product card is glass adhesive sealant, so prepare it in advance along with a degreaser. The procedure is standard: dry test fit, marking and, if needed, trimming the sections, degreasing the surface, gluing, and fixing until the adhesive fully cures. Don’t rush the test fit — it determines how evenly the joints between the sections will line up. You can have the lip installed at the network of certified DD Tuning service centers — the manager will tell you the nearest one.

Other colors and vehicle-specific lips

The same lip with the same dimensions is available with a colored lower insert: Niken Red, Niken Blue, Niken Grey, Niken White and Niken Yellow. Black is the most understated, all-black option without a contrasting accent.

A vehicle-specific lip is made for a specific body, so it follows the bumper shape and fits with minimal adjustment. If one exists for your car, first browse front bumper lip spoilers with brand and model selection. The universal Niken Black is chosen when there is no vehicle-specific lip for the body or when you like this exact design; all universal options are collected in the universal lip spoilers section.

The description was prepared with the help of AI based on analysis of over 1 million phone calls between DD Tuning managers and customers and the company knowledge base. We collected the questions customers ask most often and answers verified in practice.