Ukrainian accessories for tuning — Page 2

ULTIMATE Sound Absorber PU 15mm noise-absorbing material, based on special polyurethane foams. Material with a developed pyramidal front surface, covered with a sound-transparent elastic latex layer that protects the product from moisture. Has the ability to absorb and dissipate noise in a wide frequency range. The highest efficiency is from 300 to 5000 Hz. It is used to achieve the maximum high sound quality result when installing acoustics. 10 times more effective than standard foam rubbers (sound absorption coefficient up to 95%). The material has the ability to slowly recover after compression (memory effect), does not emit odor and does not stain adjacent surfaces. Application: roof, door cards, panels, interior trim, bottom.

GUARD DEFENDER is a reliable surface protector against corrosion and stone impacts. The best for noise insulation of arches and parts of the bottom, subject to abrasive influence. - forms an elastic and elastic protective layer - easy to mount - does not require additional equipment - enhances the effect of vibration-absorbing materials Thickness - 1.8 mm Size - 500x375 (0.19 m2) Weight - 3.2 kg/m2 Application: 1st option - as an anti-corrosion and protective product for arches and bottoms, which is superior in protective qualities to existing mastic materials applied by spraying. It has a tightening effect when damaged by large stones and is practically not damaged by fine abrasive sand. It has significantly greater damping properties than any mastic or anti-gravel coating. 2nd option - applied on top of vibration-absorbing materials when finishing arches from the outside (from the street). Protects the aluminum foil layer from damage. The 3rd option - can be used as an elastic and plastic connecting material between various other materials that do not have an adhesive layer. Can play the role of an assigned layer.

Vibration-absorbing sheet ULTIMATE EXPERT SILVER BLUE a new generation of vibration-absorbing plates based on butyl polymers; original embossing increases the rigidity of the structure and simplifies the installation process on complex surfaces; heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies installation; effectively tames vibrations of vibration-loaded profiled metal surfaces (wings, door surfaces, bottom, luggage compartment). maximum effect at temperatures from -15°C to +30°C. Thickness - 3.0 mm Size: 500 x 350 mm Weight: 4.5 kg/m2. Operating temperature - from -30°C to +90°C. Acoustic noise reduction - 85%* Vibration amplitude reduction - 80%* Efficiency on metal sheet - up to 3 mm In a package - 15 pcs. 2.63 m2. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE EXPERT GOLD COLD a new generation of vibration-absorbing plates based on butyl polymers; original embossing increases the rigidity of the structure and simplifies the installation process on complex surfaces; heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies installation; effectively tames vibrations of plastic and metal surfaces (roof, wings, door panels, luggage compartment). maximum effect at temperatures from -15°C to +30°C. Thickness: 2.1 mm Size: 500 x 350 mm Weight: 3.5 kg/m2. Operating temperature - from -30°C to +90°C. Acoustic noise reduction - 80%*, Vibration amplitude reduction - 70%* Efficiency on metal sheet - up to 1.5 mm In the package - 22 pcs. 3.85 m2. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE EXPERT RED GOLD a new generation of vibration-absorbing plates based on butyl polymers; original embossing increases the rigidity of the structure and simplifies the installation process on complex surfaces; heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies installation; effectively tames vibrations of significantly vibration-loaded profiled metal surfaces (bottom, arches, engine shield, luggage compartment). maximum effect at temperatures from -15°C to +30°C. Thickness - 4.0 mm Size: 500 x 350 mm Weight: 5.5 kg/m2. Operating temperature - from -30°C to +90°C. Acoustic noise reduction - 85%* Vibration amplitude reduction - 90%* Efficiency on metal sheet - up to 3.5 mm In a package - 12 pcs. 2.1 m2. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing material ULTIMATE U-POWER CARBON A new generation of vibration-absorbing plates based on carbon fiber-reinforced polymer rubbers; Uncompromisingly tames vibration, significantly increases structural rigidity; The combination of low weight with high efficiency allows mounting on all surfaces of the car! Recommended for use on electric vehicles. Heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies mounting; Effectively tames vibrations of significantly vibration-loaded profiled metal surfaces (bottom, arches, engine shield, luggage compartment). Maximum effect at temperatures from -15°C to +35°C. Thickness - 3.0 mm Size: 500 x 350 mm Weight: 4.0 kg/m2. Operating temperature - from -30°C to +100°C. Acoustic noise reduction - 90%* Vibration amplitude reduction - 95%* Efficiency on metal sheet - up to 3.5 mm In the package - 15 pcs. 2.62 sq. m. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE U-POWER EASY (lightweight rigid) A new generation of premium vibration-absorbing plates based on reinforced polymer rubbers. Uncompromisingly tames vibration, significantly increases structural rigidity; Recommended for use on electric vehicles and sports cars. Heat treatment of aluminum gives it plasticity, ensures high efficiency and simplifies installation. Effectively tames vibrations on smooth surfaces, can be used as a second reinforcing layer on profiled metal surfaces (bottom, arches, engine shield, luggage compartment). Maximum effect at temperatures from -15°C to +35°C. Thickness - 2.1 mm Size: 500 x 350 mm Weight: 2.8 kg/m2. Operating temperature - from -30°C to +100°C. Acoustic noise reduction - 80-90%* Vibration amplitude reduction - 80-90%* Efficiency on metal sheet - up to 1.0 mm Package - 22 pcs. Coverage area - 3.85 sq. m. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE U-POWER UNI (universal) A new generation of premium vibration-absorbing plates based on reinforced polymer rubbers. Uncompromisingly tames vibration, significantly increases structural rigidity; The combination of low weight with high efficiency allows mounting on all surfaces of the car! Recommended for use on electric vehicles. Heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies mounting; Effectively tames vibrations of significantly vibration-loaded profiled metal surfaces (bottom, arches, engine shield, luggage compartment). Maximum effect at temperatures from -15°C to +35°C. Thickness - 2.6 mm Size: 500 x 350 mm Weight: 3.6 kg/m2. Operating temperature - from -30°C to +100°C. Acoustic noise reduction - 85-90%* Vibration amplitude reduction - 90-95%* Efficiency on metal sheet - up to 3.0 mm In the package - 18 pcs Coverage area - 3.15 sq. m. *metal thickness 0.8 mm, smooth surface, 100% coverage.

«ULTIMATE U-POWER VULCAN CORKY 10 is a unique product that combines noise-absorbing and thermal insulation properties, sheet, thickness 10mm (500 x 1000mm), pack. - 4 pcs. (2m²) + glue; weight - 2.4kg/m², operating range: 160÷5000 Hz. »