Mercedes Sprinter W906 2006–2018 Winter grille cover V2 (2013↗)

Description

Winter grille cover V2 — a black matte ABS plastic cover for Mercedes Sprinter W906 after the 2013 facelift (2013–2018). It mounts over the factory grille with hooks, повторює its horizontal slats with a relief pattern and keeps the Mercedes emblem visible. In winter, the cover reduces the flow of cold air to the radiator, so the engine warms up faster.

Which Sprinter 906 the V2 cover fits

The cover is made for the grille of the facelifted Sprinter 906, produced from 2013 to 2018. Before the update, the 906 has a different front end, headlights, and grille, so covers for the two versions are not interchangeable:

2013 is the cutoff: that year, vehicles were produced with both the old and the new front end. Do not rely on the year in the documents; rely on the actual grille and headlights — especially if the front end was replaced. If in doubt, send the manager a photo of the grille.

How V2 differs from V1

Both covers are designed for the same facelifted front end and keep the emblem open. The difference is in the design: V2 has embossed horizontal ribs that повторює the slats of the factory grille, so on the vehicle it looks like part of the front end. V1 is a smooth cover with a round cutout for the emblem.

Material, mounting, and комплектation

• finish — matte, black;
• material — ABS plastic;
• installation type — hooks;
• package contents — winter grille cover;
• manufacturer — Digital Designs.

On the matte surface, minor scratches from sand and car-wash brushes are less noticeable.

How to install the winter cover on a Sprinter

You do not need to remove the factory grille, and you also don’t need to drill additional holes: the cover is held by hooks on the factory grille. Before installation, the grille is washed to remove dirt and salt, the cover is aligned to the contour, after which it is checked that the hooks sit tightly and the cover does not touch the hood. In spring, it is removed the same way — and put back on the next winter.

The cover is installed for the cold season. In warm weather, as well as during prolonged driving under load or towing during a thaw, monitor the engine temperature and remove the cover if necessary.

What else to install on a Sprinter 906 after 2013

For the same front end, there is the EuroCap hood deflector 2013+. Other winter cover options are collected on the page winter covers for Sprinter W906, and the rest of the accessories are in the section Sprinter 906 tuning. We ship orders via Nova Poshta.

The description was prepared with the help of AI based on the analysis of over 1 million phone conversations between DD Tuning managers and customers, as well as the company’s knowledge base. We collected the questions customers ask most often and the answers verified in practice.

Keep your car warm this winter with our unique cover!

Winter is not only a time of joy and holidays but also a challenge for your vehicle. Did you know that proper engine cooling can significantly improve its performance during the cold season? That’s where our winter car cover becomes your indispensable assistant!

Why is it important?

Our research has shown that at -5°C, a car engine without a winter cover heated up only to 67°C. This is not enough for optimal performance and can lead to excessive fuel consumption. But with our cover, the temperature stabilizes at an ideal 90°C!

What do you get?

1. Efficient cooling: Quickly reaches optimal operating temperature.
2. Fuel savings: Lower fuel costs thanks to improved engine efficiency.
3. Ease of use: Simple installation with no special tools required.

Make the right choice for your car!

Don’t let winter affect your car’s performance. Our winter cover is an easy and affordable way to ensure reliable operation in cold weather. Invest in comfort and efficiency today!