Front and Rear Car Bumpers — Page 10

The car bumper is one of the most noticeable body parts: it affects both the vehicle’s appearance and how securely the grilles, washer jets, and fog lights fit in place. This section features bumpers for specific models: front and rear, in OEM and tuning designs, plus mounts and small parts for installation. There are no universal bumpers here: each item is tied to a make, generation, and model years, so the easiest way to start is with the “Make / Model” filter. Most often, customers look for bumpers for Toyota Land Cruiser 200, Land Cruiser Prado 150, and Lexus LX570.

What bumpers are available in the catalog

• Bumpers in alternative designs — AMG, M-Sport and M-Performance, RS-Style, Maybach, F-Sport, Autobiography, SVA, and SVO styles. For example, an X3M-style front bumper for BMW X3 G01, or an AMG S63-style bumper for Mercedes S-class W223. For convenience, there are separate sections for front and rear bumpers.
• Facelift bumpers — to give an older model year the look of a newer version: Lexus ES 2010–2012 in 2019 design, Toyota Camry 2006–2011 in Lexus style. If the bumper upgrade also requires headlights and grille changes, see facelift kits.
• OEM bumpers — for example, the Mercedes G-class W463 2018–2024 front bumper in white and black, or the Nissan Patrol Y62 / Armada rear bumper.
• Carbon fiber bumpers — for Mercedes Vito/V-class W447, Nissan GT-R, and Mercedes G-class W465 (BRB 800).
• Reinforced Dakar steel bumpers for pickups — Toyota Hilux, Mitsubishi L200, Nissan Navara, Ford Ranger, Volkswagen Amarok; some front versions include skid plate protection. More off-road solutions are available in the heavy-duty bumpers section.
• Mounting hardware and components — brackets, guides, retainers, absorbers (reinforcements), air ducts, bumper grilles, and moldings. You can order them separately, without the bumper itself.

“Bare” bumper or complete assembly

• Base bumper — the plastic shell without grilles, blanks, or decorative inserts. These parts are transferred from the factory bumper or purchased separately.
• Complete bumper assembly — already comes with grilles and other elements listed in the product description.
• With headlights or without — for some models, these are separate versions. For example, Lexus RX 2009–2015 front bumpers: the 2009–2012 version comes with headlights, while the 2012–2015 version does not.

The exact contents are shown in the photos and in the “Package contents” field on the product page. If it says “see photo” and something is unclear, check with a manager before ordering.

How to avoid compatibility mistakes

• Years and facelift. Within the same generation, pre-facelift and post-facelift bumpers are different, so the years are listed in brackets in the name — for example, a BMW 5 G30 M-Tech front bumper “for 2017–2020”.
• Body style. For Audi A5, RS-Style rear bumpers are different for the 2-door and 4-door versions.
• Vehicle trim. For Range Rover Sport 2005–2013, front bumper trims are different for SE/HSE/Supercharged versions and for Autobiography.
• Matching front and rear styling. Technically, you can install a new front bumper and keep the old rear bumper, but the car will look unfinished — when changing the design, it’s better to replace them as a pair.
• Vehicle market. European and US versions of the same model may differ in mounting points, license plate area, and fog light locations, so if your car was imported from the US, verify fitment separately.

If you’re unsure, send the manager the VIN and photos of the vehicle — compatibility will be checked before payment. Photos are especially important if the bumper has already been replaced after a repair: in that case, the VIN alone is not enough.

Sensors, camera, and washer jets

Before ordering, list what’s installed in your factory bumper: parking sensors, front camera, adaptive cruise control radar, headlight washers, fog lights. Compare the photos and the product name to confirm the new part has provisions for them. Sensor holes are often only marked and are cut during pre-paint preparation, while the sensors and brackets are transferred from the old bumper. For a facelift, different brackets and guides may be required — it’s best to have this work done by a professional.

Material and painting

Most plastic bumpers are made of ABS plastic and are supplied unpainted: they are painted to match the body color before installation and mounted in the factory locations. The correct process is to test-fit the bumper on the car before painting: check symmetry, mounting points, and gaps with the fenders, headlights, and hood, and only then prep and paint the part. Color matching should be done to the actual vehicle, not just the paint code — this helps the shade match better. Dakar bumpers are steel, with a black finish. Manufacturers include GBT, 1234 Upgrade, GT Tuning, Omsa Line, and DDCarbon. You can install the bumper at DD Tuning’s network of certified service centers — a manager will recommend the nearest one.

What to pair it with

To complete the look, pair your bumper with front bumper lip spoilers, rear diffusers, rear bumper protectors, and radiator grilles. If you plan to replace both bumpers along with side skirts, take a look at body kit sets.

This description was prepared with the help of AI based on the analysis of over 1 million phone conversations between DD Tuning managers and customers, as well as the company’s knowledge base. We collected the questions customers ask most often and the answers proven in practice.