Toyota Land Cruiser Prado 120 2002-2009 Front left cover for roof rails

Description

Front left rail cover — a black plastic end cap that covers the front mount of the factory roof rail on the driver’s side (on left-hand-drive vehicles) on the roof of the Toyota Land Cruiser Prado 120 2002–2009. Manufacturer Cixtai, ABS plastic material, installs on the rail, комплект includes 1 piece, part number 120-PRD-2FL.

Where exactly the front left cover is located

Each factory Prado 120 roof rail has two mounts — front and rear, and each is covered by its own cover. The front left one sits on the front end of the left rail, closer to the windshield. Left and right sides are determined while sitting behind the wheel facing the direction of travel. If in a conversation with the manager you call the part a “cap”, “tip”, “plastic piece on the rail”, or “front rail plug” — it’s exactly this one.

Which of the four Prado 120 covers you need

All four are Cixtai, black ABS plastic, 1 piece each. They are not interchangeable: the front and rear have different shapes for different mounts, and the left and right are mirrored. The front left cannot be fitted to the right mount or the rear one.

Which rails the cover fits

• Factory Prado 120 rails. The cover follows the shape of the OEM front mount and the rail profile.
• Aftermarket rails — generally no. Covers for Turkish, Chinese, and other non-factory rails are selected for their own mount design, and they usually don’t fit factory mounts — and vice versa.
• Prado 150, Lexus GX 470, Fortuner — no guarantee. Reports on cover interchangeability between these models and the 120 differ, so you shouldn’t count on fitment without checking.

The most reliable way is to compare your vehicle’s mount with the photos on the product page. If you’re unsure, take a side photo of the mount without the cover and, if it’s still available, the old cover from the front and back — the shape and clips are visible in the pictures.

How to install the cover and whether to buy a pair

The cover slips onto the mount and rail profile and locks in with clips — no separate fasteners, glue, or drilling is required. Before installation, remove any fragments of the old part and clean dirt off the mount; if the cover doesn’t seat without force, check the side and position. The new cover is glossy, while the factory one often turns matte over the years in the sun, so for a uniform look at the front the front covers are replaced as a pair — together with the front right.

If it’s not the cover that’s damaged but the rail or the mount itself, take a look at original-design rails, Turkish black and chrome rails. The rest of the small parts are in Prado 120 rail components, crossbars and roof racks are in Prado 120 roof racks and rails, and all model accessories are on the Toyota Land Cruiser Prado 120 2002–2009 page.

Description prepared with the help of AI based on analysis of over 1 млн phone conversations between DD Tuning managers and customers and the company knowledge base. We collected the questions customers ask most often and answers verified in practice.