Toyota Land Cruiser Prado 120 2002-2009 Front right cover for roof rails

Description

The front right cover for roof rails is a black cap/blanking cover for the front roof rail support on the right side (passenger side on a left-hand-drive vehicle) of the Toyota Land Cruiser Prado 120 2002–2009: manufacturer Cixtai, ABS plastic, mounts onto the rail, sold as 1 piece. This replaces a lost or broken OEM cover; front and rear, left and right covers are different parts, so the catalog lists them as four separate items.

Which of the four covers you need

The side is determined while facing the direction of travel: the right cover is above the front passenger door on a left-hand-drive vehicle. Front and rear covers are not interchangeable even on the same side — they have different shapes for different supports. If you are replacing both rear or both front ones, buy a pair: the new cover is glossy black plastic and may differ in shade from the OEM one that has faded in the sun.

How to check that the cover will fit your rails

• Compare the support shape with the photos on the product page. The cover is designed for OEM Prado 120 rails; as a rule it does not fit Turkish or other non-original rails — their support geometry is different.
• Take a photo of the support without the cover and the old cover (front and back) and send it to the manager if you are not sure — the clips and fitment can be seen from the photo.
• Do not rely on parts from the Prado 150, Lexus GX 470, or Fortuner: reports about their interchangeability with 120-series covers vary, and without checking by photo you should not count on proper fitment.

In the comments under the product page, buyers write that the covers fit their rails “like OEM” — but checking by photo takes a minute, while returning a small part takes a week.

How to install the cover

1. Remove any remaining pieces of the old cover and clean dirt off the support.
2. Place the new cover onto the support so that it matches the rail profile and the outline of the foot.
3. Press until the clips lock in place. No separate fasteners, glue, or drilling is needed; if the cover does not seat without force — it is not the right support or not the right side.

If you need the rails themselves, not the covers

When the supports of the OEM rails are broken or there are no rails at all, for the Prado 120 the catalog has original-design rails (2 pcs), Turkish black and chrome ones on plastic or metal feet, as well as crossbars for a roof box — everything is collected on the page roof racks and rails Prado 120. The rest of the components (feet, end caps, covers for other rails) are in the section components for rails, and all body accessories are on the page Toyota Land Cruiser Prado 120 2002–2009.

The description was prepared with the help of AI based on analysis of over 1 million phone calls between DD Tuning managers and customers and the company knowledge base. We compiled the questions customers ask most often and answers proven in practice.