In this article, you will learn how to make noise insulation for the Lada Priora hood and what materials, as well as a tool, will be needed for this.
Author: Radomskyi Maksym VasyliovychSoundproofing the hood of the Lada Priora is a fairly simple job that you can do on your own. We describe this process below. However, on our site you will also find such useful articles as: Priora roofsoundproofing and floor soundproofing .
Materials and tools
To work on soundproofing the hood, you will need the following:
- Industrial dryer.
- Knife, scissors.
- Stitching roller.
- Rags.
- Degreaser (gasoline or white spirit).
- Cardboard for making patterns.
- If necessary, a screwdriver.
- Noise-insulating material (for example, Shumoff M2).
- Vibration isolation material (for example, Shumoff Comfort 6).
You can find our range of soundproofing products here .
Soundproofing the hood of the VAZ 2170 - Priora
All work is carried out in the following step-by-step sequence:
- First of all, the regular trim will be removed from the inside of the hood.
- Then the metal surface is cleaned of dirt and degreased.
- Now patterns are made from cardboard, according to which patterns are cut out of materials.
- After the hood has dried out, the first layer is applied - vibration isolation. In this case, it is necessary to heat the adhesive base with a hairdryer, and carefully roll the material itself with a roller over the surface.
- The second layer is a soundproofing material, we also roll it.
- This completes the hood Shumkov process. Finally, install the standard trim in place.
In addition to this topic, you can also read the article Do-it-yourself hood noise isolation and the necessary materials .
This material was prepared using AI tools for topic research, structuring and initial draft creation. Fact-checking, editing, expert review and final approval were performed by Maksym Vasyliovych Radomskyi.
