Do-it-yourself soundproofing of the hood of the VAZ 2110

In continuation of the topic of car soundproofing, we bring to your attention a step-by-step guide to the sound of the VAZ 2110 hood with your own hands. On this topic, you can also pay attention to the article about soundproofing the "dozens" floor , published earlier on our website.

Tools and materials

To work with the hood, you will need the following tools and materials:

• Hair dryer industrial.
• Cutting tool (knife, scissors).
• Degreaser, for example, gasoline "Kalosha".
• Rags.
• Cardboard for making patterns.
• The roller is stitched.
• Sound deadening material, e.g. Ultimate Soft 6.
• Vibration isolation, for example, Shumoff M2.

Soundproofing the hood

So the process looks like this step by step:

• First you need to remove the factory inner lining of the hood. To do this, we hook plastic clips.
• Then remove the dirt, carefully degrease and let dry.
• Next, we make patterns from cardboard, and cut patterns out of them from materials.
• We apply a vibration isolator to the surface, while warming it up with a hairdryer and rolling it with a roller.
• The second layer is glued with soundproofing material.
• After that, install the factory hood trim in place.

This completes the soundproofing work. Also on this topic, you can get useful information from the article: Do-it-yourself hood noise isolation and necessary materials .