Do-it-yourself dashboard soundproofing: antiskrip

It often happens that an annoying creak from the dashboard is heard in the passenger compartment, which is very annoying while driving. In addition, the dashboard can be a source of various other noises. In this article, you will learn how to soundproof a dashboard with your own hands - an anti-creak. By the way, you may be interested in an article on the topic: Do-it-yourself car roof soundproofing .

Required Tool

In order to perform anti-creaking of the dashboard, you must have some tool:

• Degreaser;
• Cutting tool;
• Clean rags;
• Roller;
• Torpedo removal tool.

Process

So, the work on denoising the dashboard looks like this:

• First you need to dismantle the dashboard. The process is time-consuming and requires special attention, so that later, during assembly, nothing is confused.
• After that, the surfaces are cleaned from dust, dirt and degreasing.
• Then the vibration damper is glued. The area of the glued surface should be about 60-70%. At the same time, it is recommended to apply the material both on plastic parts and on metal ones.

Note: the main thing here is not to overdo it, so as not to make the dashboard too heavy.

• The next layer is applied soundproofing material. In this case, you need to process 100% of the surface of the back side of the tidy.
• The next stage is the application of sealing material to all joints between the panels. Here you should not forget about the air ducts and moving parts.
• We pay attention to the wires. They must be assembled into bundles and tied with a sealant so that they do not knock on the dashboard.
• Dashboard installation. Here you need to make sure that all fasteners are in place.

That's all, the dashboard soundproofing is completed. We hope our article will be useful to you.