Author: Radomskyi Maksym VasyliovychVery often, car companies neglect the soundproofing of the car roof. Although, this is quite a large part of the car body, through which vibrations and noises are transmitted, and the factory lining does not carry such a function. Therefore, we suggest that you familiarize yourself with the main stages of soundproofing the roof with your own hands. If you are interested in car soundproofing accessories, then you can find our range at the link .
Required tool
This list lists the tools you will need for this job:
- Stitching roller;
- Degreaser;
- Rags;
- Scissors or knife;
- Industrial hair dryer (if necessary);
- Screwdrivers.
Process
So, the whole process of installing Shumka on the roof of a car is quite simple and you can do it yourself:
- First, the ceiling lining is removed. If there is a factory noise, then it is also removed.
- Next is a thorough degreasing.
- After the surface has dried, vibration isolation is glued with the first layer. If necessary (depending on what material you use), warm it up with a hairdryer and roll it with a roller.
- Next, a layer of soundproofing is applied. When pasting stiffeners, you need to remember that you will need to mount the roof sheathing from above, so the thickness of the material in this case should not be more than 5 mm.
- The final step is installing the factory roof sheathing.
As you can see, the work of soundproofing the roof of a car with your own hands is quite doable. In return, you can save money and get not only sound insulation of the vehicle, but also thermal insulation, which will make your car more comfortable.
