Do-it-yourself Lanos floor soundproofing

In continuation of the theme of soundproofing Lanos, we suggest that you familiarize yourself with a step-by-step guide on how to make a noise floor for this model. From previous publications, you can also learn how to make soundproofing Lanos doors with your own hands , etc.

materials

To work on soundproofing the floor, you will need the following:

• Vibration damper Shumoff M4 - 25 sheets.
• Shumka Ultimate Soft 6 - 6 l.
• Rags.
• Degreaser.
• Roller roller.
• Dryer construction.

Disassembly

It is recommended to disassemble the Lanos floor in the following sequence:

• First things first, you need to remove the seats by unscrewing the mounting bolts.
• After that, the central tunnel of the gearbox is disassembled - the bolts on the sides of the parking brake casing are unscrewed, we shift back a little and disconnect the power window wiring, unscrew the fixing screws on the gearshift lever trim and disconnect the cigarette lighter wiring, pull the trim up through the gearshift lever.
• We remove the factory door sills (brackets and clips).
• We unscrew the fixing bolts of the seat belts, remove the trim of the central pillars.
• We disassemble the facing panels under the dashboard, located near the legs on the sides.
• We disassemble the mounting bracket for the center console of the dashboard (only 4 bolts and 4 nuts).
• We unscrew the plastic mounting bracket for the gearshift lever.
• After that, we take out the flooring from the passenger compartment.
• We take out the standard noise.

Sticking and assembly

After the floor of the car is dismantled, we begin to work on noise reduction.

• First, we thoroughly clean everything, degrease and let it dry.
• Then we glue the Shumoff M4 vibration isolation, while carefully rolling it.
• The second layer of Ultimate Soft 6 stele (can be applied in whole sheets).

You can learn a more detailed work process from the article: Do-it-yourself soundproofing the floor of a car , published earlier.

The assembly of the interior parts is carried out in the reverse order, and there should not be any difficulties with this.