U-POWER OVERTON 7NET is a noise-absorbing and sealing material with a reinforced adhesive layer based on special polyurethane foams, so even at its thickness of 7 mm it competes with analogues twice as thick! The reinforced adhesive layer allows the material to be mounted on metal and plastic surfaces without stretching or deformation. U-POWER OVERTON 7NET is used to achieve the maximum high sound quality result when installing acoustics. 10 times more effective than standard foam rubbers (sound absorption coefficient up to 95%). The material has the ability to slowly recover after compression (memory effect), does not emit odors and does not stain adjacent surfaces. Absorbs moisture less than 30% by mass and dries quickly.
Modern damping material intended for use as a vibration-absorbing coating in vehicles, agricultural machinery and other objects with requirements for reducing noise and vibration.
GUARD DEFENDER is a reliable surface protector against corrosion and stone impacts. The best for noise insulation of arches and parts of the bottom, subject to abrasive influence. - forms an elastic and elastic protective layer - easy to mount - does not require additional equipment - enhances the effect of vibration-absorbing materials Thickness - 1.8 mm Size - 500x375 (0.19 m2) Weight - 3.2 kg/m2 Application: 1st option - as an anti-corrosion and protective product for arches and bottoms, which is superior in protective qualities to existing mastic materials applied by spraying. It has a tightening effect when damaged by large stones and is practically not damaged by fine abrasive sand. It has significantly greater damping properties than any mastic or anti-gravel coating. 2nd option - applied on top of vibration-absorbing materials when finishing arches from the outside (from the street). Protects the aluminum foil layer from damage. The 3rd option - can be used as an elastic and plastic connecting material between various other materials that do not have an adhesive layer. Can play the role of an assigned layer.
The price is for a cut sheet measuring 0.5*0.75 meters. The material is made of foam rubber, does not emit toxins or odors into the air, and is used for finishing the floor, trunk, roof, and engine compartment.
ULTIMATE CAT’S PAW 2 mm ⁃ noise-blocking acoustic membrane. The product is mounted as a top finishing layer, has low sound permeability. Has high elasticity and adhesiveness. Easy to install on surfaces of any complexity and texture. Acoustic noise reduction in the form of a referred layer - depends on the choice of the material of the previous layer: With ULTIMATE ACCENT/ACCENT PRO material (4 mm) - acoustic noise reduction 70 - 75% With ULTIMATE SOFT 6 material (6 mm) - acoustic noise reduction 75 - 80% With ULTIMATE SOUND ABSORBER 5 material (5 mm) - acoustic noise reduction 80 - 85% With ULTIMATE U-POWER OVERTONE 7 material (7 mm) - acoustic noise reduction 80 - 90% Operating temperature - from -30°C to +90°C. Thickness - 2.0 mm Size - 500x350 mm Weight - 3.2 kg/m2. In the package - 22 pcs. 3.85 m2.
ULTIMATE TOP COAT - noise-blocking acoustic membrane. The product is installed as a top finish layer, has low sound permeability. Due to its high elasticity and adhesiveness, TOP COAT is easy to install on surfaces of any complexity and texture. Acoustic noise reduction depends on the choice of the previous layer. with ULTIMATE ACCENT/ACCENT PRO material (4 mm) - acoustic noise reduction 70 - 75% with ULTIMATE SOFT 3 material (3 mm) - acoustic noise reduction 70 - 75% with ULTIMATE SOFT 6 material (6 mm) - acoustic noise reduction 75 - 80% with ULTIMATE SOUND ABSORBER 5 material (5 mm) - acoustic noise reduction 80 - 85% with ULTIMATE U-POWER OVERTON 7 material (7 mm) - acoustic noise reduction 85 - 95% Size - 750x500 mm Weight - 3.3 kg/m2.
Acoustic rings for speaker sound correction ULTIMATE SPEAKER RINGS KIT Rings prevent sound energy from being dispersed under the card. The inner circle, when placed behind the speaker, neutralizes rear sound. simple and effective solution for sealing 6-inch speakers glue the inner circle behind the speaker to neutralize rear sound prevent sound energy from being dispersed all the sound from the speakers is directed into the listening space precise, reliable and easy mounting Internal size - 147 mm External size - 190 mm Thickness - 20 mm Set - 2 pieces
In the catalog of our online store offers a large selection of products for Volkswagen T5 Transporter 2003-2010 Tuning from 1 USD and up 4500 USD.
Volkswagen T5 Transporter 2003-2010 Tuning – you are unique. The pros
The opportunity to pay in several ways.
Surprisingly low prices on the products for Volkswagen T5 Transporter 2003-2010, which is reduced even more due to monthly promotions.
High quality service and individual approach to customers.
Long-term guarantee on auto accessories for Volkswagen T5 Transporter 2003-2010.
No fakes – products for Volkswagen T5 Transporter 2003-2010 only from the official manufacturer.
Prices are cheaper than elsewhere: 0 to 675 USD.
Frequently asked questions
The front-end parts, including the winter covers and hood deflector, are different for the pre-facelift 2003–2010 and the facelift 2010–2015. There is a separate page for the T5 2010–2015, and for 2010 vehicles, match the headlights and grille with the product photos.
The wheelbase is specified in the vehicle documents; if you are unsure, take a side photo of the vehicle and send it to the manager. Side sills, roof rails, and moldings for the short and long wheelbase differ in length and are not interchangeable.
The 1+1 designation means two separate seats, while 2+1 (or 1+2) means the driver’s seat and a double passenger seat. Their templates are different, so for the T5 there are separate EVA, Carsuit, and textile mat options for each cab configuration.
A tailgate is a single lifting rear door, while barn doors are two hinged doors, and the spoilers for them have different shapes. The DPT spoiler for the T5 is available in separate versions for the tailgate and for barn doors; the trim above the license plate is also chosen according to the door type.
Yes. The upper one covers the radiator grille, and the lower one covers the opening in the bumper; they are sold separately and installed together. They attach with hooks over the factory grille.
Yes, for the T5 Transporter 2003–2010 there are facelift kits to T6.1 in Sportline and OEM versions from GBT. They can be installed in the network of certified DD Tuning service centers.
.jpg)
