Author: Radomskyi Maksym VasyliovychYou already bought the equipment for coating to yourself to do a pretty lucrative business? Then you need to know all the nuances of the technological process of applying akvaprint on parts of the machine. And the most critical, time-consuming and is considered an important step to prepare the surface by applying a film.
Surface preparation for coating: step by step instructions
- Alignment.
If you treat the plastic piece that has a roughness, unevenness or orange peel, you have all these defects removed manually the most common nazhdachnoj paper and a variety of skins. Of course, you can simply apply a sealer, but not everyone will be able to apply it correctly, which will lead to the future cracking of the coating.
- Degreasing products.
Remember, no primer, enamel or paint will not lay down evenly and efficiently to the surface, which is not pre-degreased. For these purposes, it is best to use purified gasoline or alcohol. You need to work with a soft cotton cloth that leaves no lint or brush. In any case, do not use kerosene.
- Primer.
Necessary to align the minor roughness, fine roughness and other surface defects that could not "smooth out" nazhdachkoy. Some applied to metal or plastic panel once the "base" layer of enamel or paint. But we would not recommend this method of work, as it provides strength primer "base". And the colors in this case, you will have to spend less. For carrying out the preparatory work for coating, it is desirable to use acrylic filler 4+1 Sellack (instructions for use written on the packaging). You can of course choose a different material, but we only use this type of primer. It is suitable for metal and plastic. For faster drying I advise you to use the most common lamp. Once again, the surface should be degreased.
- Application of the base (substrate)
The film itself for coating and translucent to give depth to the color and change the hue of the picture, be sure to make the substrate. For example, for decorative "carbon" approach based on the black color to simulate "wood" brown, and "under the metal" - light gray. There is also a fully transparent film. And changing the color database, you can obtain the simulation of different shades (e.g., the color of the car body or trim). More in detail we wrote about it in category: Film coating: learn to choose.
The substrate to create a special enamel (applied in several layers), but it can be done and colored soil. For carbon fiber and dark wood this stage may be skipped.
To buy equipment for coating and more than 1000 kinds of films, you can in our online store.
Go to the next step: Film coating: moving workpiece
