How to remove tint film from car headlights?

Headlight tinting can change the look of your car, but over time it can tarnish, peel, or begin to affect the brightness of the light. In this article, we will tell you how to remove tint film from car headlights using two simple methods. You can also significantly improve your car and make it individual with the help of tuning accessories, a large assortment of which is available in our online store.

Removing the film with a hair dryer

Step by step guide:

1. Heat the hair dryer to the maximum temperature if you use an ordinary household one, and if you use an industrial one, it is important to adjust the temperature.
2. Direct a stream of hot air onto the film, heating it evenly.
3. Gently pull the edge of the film with tweezers or a blade.
4. Peel off the film slowly, gradually heating it with a hair dryer.
5. Remove the remaining glue with a special agent or white spirit.

Using a soapy solution

1. Prepare a soap solution by mixing water and shampoo.
2. Wet the film with a soapy solution, especially around the edges (you can use a sprayer).
3. Leave the film for 3-5 minutes to soak.
4. Pinch the edge of the film with tweezers or a blade.
5. Peel off the film by gradually wetting it with a soapy solution.
6. Remove the remaining glue with a special agent or white spirit.

Advice

• Be careful not to damage the headlights with sharp objects.
• Be careful not to melt the plastic when using the hair dryer.
• Glue residues can be removed using a special glue remover or white spirit.

Importantly

• Do not use acetone or other aggressive solvents as they may damage the headlights.
• Do not rub the headlights with a brush, as this can cause scratches.
• Do not use a razor blade as it may damage the headlights.

Removing tint film from car headlights is a simple task that you can do yourself. By following our tips, you will be able to remove the film quickly and without damage.