Author: Radomskyi Maksym VasyliovychChecking the oil level in the engine is an important procedure for maintaining the health of the car. Lack or excess of oil can lead to serious breakdowns. This article will tell you how to correctly measure the oil level to ensure reliable engine operation. Your car will become more stylish and visually special when using tuning accessories, a huge selection of which can be found in our product catalog.
Preparing for the inspection
To obtain accurate readings, it is very important to properly prepare the machine.
- Park the car on a flat, level surface. If the car is parked on an incline, the readings will be incorrect.
- Turn off the engine. Let it run for 5-10 minutes, then turn it off. Wait another 5 minutes for all the oil to drain into the sump.
- Lift the hood and locate the oil dipstick. It usually has a bright handle (orange or yellow).
Measurement process
The process of checking the oil level is simple.
- Remove the dipstick. Carefully pull it out of the guide tube.
- Wipe the dipstick. Use a clean rag or paper towel to wipe the dipstick dry to remove any oil.
- Put the probe back in. Insert it all the way into the tube until it stops.
- Remove the dipstick again. There will now be a clear trace of oil on it.
Result evaluation
There are special marks on the end of the oil dipstick - MIN and MAX .
- The ideal level is between these marks, closer to the MAX mark.
- If the level is below the MIN mark , you must add oil immediately.
- If the level is higher than the MAX mark , this is also bad, as it can lead to excessive pressure in the engine and damage to the oil seals.
Conclusion
Regularly checking your oil level (preferably once every 1-2 weeks) should become a habit. It's an easy way to keep your engine in good working order and avoid costly repairs.
