MG 4 EV 2022- Tuning — Page 37

Sound-absorbing sheet ULTIMATE SQL A 15NET (Sound Quality Lab series) with reinforced adhesive layer. A new generation of sound-absorbing plates based on acoustic polyurethane foam. The reinforced adhesive layer allows you to mount the material on metal and plastic surfaces without stretching or deformation. • has a memory effect; • the semi-closed structure of the cavities provides a noise-absorbing effect, as well as high-quality noise and thermal insulation. • operating frequency range: 300-4000 Hz. Thickness - 15 mm Weight - 680 g/ m². Sheet size - 750 × 1000 mm Acoustic noise reduction - 80%

U-POWER OVERTONE 7L is a noise-absorbing and sealing material based on special polyurethane foams, covered with a sound-transparent elastic latex layer that protects the product from moisture. Even at its thickness of 7 mm, it competes with analogues twice as thick! U-POWER OVERTONE 7L is used to achieve the maximum high sound quality result when installing acoustics. 10 times more effective than standard foams (sound absorption coefficient up to 95%). The material has the ability to slowly recover after compression (memory effect), does not emit odors and does not stain adjacent surfaces. Absorbs moisture less than 30% by mass and dries quickly.

ULTIMATE SQL 5 L Sound Quality Lab A new generation of sound-absorbing plates based on acoustic foam. • has a memory effect; • is covered with a waterproof PU film • sealing and anti-squeak properties • the semi-closed structure of the cavities provides a sound-absorbing effect, as well as high-quality sound and thermal insulation. • operating frequency range: 500-4000 Hz. Thickness - 5 mm Weight - 350 g/ m2 Sheet size - 750 × 1000 mm

ULTIMATE SQL NFF 15 Sound Quality Lab Non flam Foam A new generation of noise-absorbing plates based on non-flammable acoustic polyurethane foam. • does not support combustion, does not burn; the flammability test can be viewed here • the semi-closed structure of the cavities provides a noise-absorbing effect, as well as high-quality noise and thermal insulation • operating frequency range: 350-4000 Hz. Thickness - 15 mm Weight - 550 g/ m² Sheet size - 750 × 1000 mm Acoustic noise reduction - 75%

ULTIMATE Sound Absorber PU 15mm noise-absorbing material, based on special polyurethane foams. Material with a developed pyramidal front surface, covered with a sound-transparent elastic latex layer that protects the product from moisture. Has the ability to absorb and dissipate noise in a wide frequency range. The highest efficiency is from 300 to 5000 Hz. It is used to achieve the maximum high sound quality result when installing acoustics. 10 times more effective than standard foam rubbers (sound absorption coefficient up to 95%). The material has the ability to slowly recover after compression (memory effect), does not emit odor and does not stain adjacent surfaces. Application: roof, door cards, panels, interior trim, bottom.

Vibration-absorbing sheet ULTIMATE CONSTRUCT A4 A new generation of vibration-absorbing plates based on polymer rubbers; Original embossing increases the rigidity of the structure and simplifies the installation process on complex surfaces; Heat treatment of aluminum gives it plasticity, ensures high efficiency and simplifies installation; Effectively tames vibrations of significantly vibration-loaded profiled metal surfaces (bottom, arches, engine shield, luggage compartment). Maximum effect at temperatures from -15°C to +30°C. Thickness - 4.0 mm Size: 500 x 350 mm Weight: 5.4 kg/m2. Operating temperature - from -30°C to +90°C. Acoustic noise reduction - 90%* Vibration amplitude reduction - 95%* Efficiency on metal sheet - up to 3.5 mm *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE EXPERT SILVER BLUE a new generation of vibration-absorbing plates based on butyl polymers; original embossing increases the rigidity of the structure and simplifies the installation process on complex surfaces; heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies installation; effectively tames vibrations of vibration-loaded profiled metal surfaces (wings, door surfaces, bottom, luggage compartment). maximum effect at temperatures from -15°C to +30°C. Thickness - 3.0 mm Size: 500 x 350 mm Weight: 4.5 kg/m2. Operating temperature - from -30°C to +90°C. Acoustic noise reduction - 85%* Vibration amplitude reduction - 80%* Efficiency on metal sheet - up to 3 mm In a package - 15 pcs. 2.63 m2. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE EXPERT GOLD COLD a new generation of vibration-absorbing plates based on butyl polymers; original embossing increases the rigidity of the structure and simplifies the installation process on complex surfaces; heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies installation; effectively tames vibrations of plastic and metal surfaces (roof, wings, door panels, luggage compartment). maximum effect at temperatures from -15°C to +30°C. Thickness: 2.1 mm Size: 500 x 350 mm Weight: 3.5 kg/m2. Operating temperature - from -30°C to +90°C. Acoustic noise reduction - 80%*, Vibration amplitude reduction - 70%* Efficiency on metal sheet - up to 1.5 mm In the package - 22 pcs. 3.85 m2. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE EXPERT RED GOLD a new generation of vibration-absorbing plates based on butyl polymers; original embossing increases the rigidity of the structure and simplifies the installation process on complex surfaces; heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies installation; effectively tames vibrations of significantly vibration-loaded profiled metal surfaces (bottom, arches, engine shield, luggage compartment). maximum effect at temperatures from -15°C to +30°C. Thickness - 4.0 mm Size: 500 x 350 mm Weight: 5.5 kg/m2. Operating temperature - from -30°C to +90°C. Acoustic noise reduction - 85%* Vibration amplitude reduction - 90%* Efficiency on metal sheet - up to 3.5 mm In a package - 12 pcs. 2.1 m2. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing material ULTIMATE U-POWER CARBON A new generation of vibration-absorbing plates based on carbon fiber-reinforced polymer rubbers; Uncompromisingly tames vibration, significantly increases structural rigidity; The combination of low weight with high efficiency allows mounting on all surfaces of the car! Recommended for use on electric vehicles. Heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies mounting; Effectively tames vibrations of significantly vibration-loaded profiled metal surfaces (bottom, arches, engine shield, luggage compartment). Maximum effect at temperatures from -15°C to +35°C. Thickness - 3.0 mm Size: 500 x 350 mm Weight: 4.0 kg/m2. Operating temperature - from -30°C to +100°C. Acoustic noise reduction - 90%* Vibration amplitude reduction - 95%* Efficiency on metal sheet - up to 3.5 mm In the package - 15 pcs. 2.62 sq. m. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE U-POWER EASY (lightweight rigid) A new generation of premium vibration-absorbing plates based on reinforced polymer rubbers. Uncompromisingly tames vibration, significantly increases structural rigidity; Recommended for use on electric vehicles and sports cars. Heat treatment of aluminum gives it plasticity, ensures high efficiency and simplifies installation. Effectively tames vibrations on smooth surfaces, can be used as a second reinforcing layer on profiled metal surfaces (bottom, arches, engine shield, luggage compartment). Maximum effect at temperatures from -15°C to +35°C. Thickness - 2.1 mm Size: 500 x 350 mm Weight: 2.8 kg/m2. Operating temperature - from -30°C to +100°C. Acoustic noise reduction - 80-90%* Vibration amplitude reduction - 80-90%* Efficiency on metal sheet - up to 1.0 mm Package - 22 pcs. Coverage area - 3.85 sq. m. *metal thickness 0.8 mm, smooth surface, 100% coverage.

Vibration-absorbing sheet ULTIMATE U-POWER UNI (universal) A new generation of premium vibration-absorbing plates based on reinforced polymer rubbers. Uncompromisingly tames vibration, significantly increases structural rigidity; The combination of low weight with high efficiency allows mounting on all surfaces of the car! Recommended for use on electric vehicles. Heat treatment of aluminum gives plasticity, ensures high efficiency and simplifies mounting; Effectively tames vibrations of significantly vibration-loaded profiled metal surfaces (bottom, arches, engine shield, luggage compartment). Maximum effect at temperatures from -15°C to +35°C. Thickness - 2.6 mm Size: 500 x 350 mm Weight: 3.6 kg/m2. Operating temperature - from -30°C to +100°C. Acoustic noise reduction - 85-90%* Vibration amplitude reduction - 90-95%* Efficiency on metal sheet - up to 3.0 mm In the package - 18 pcs Coverage area - 3.15 sq. m. *metal thickness 0.8 mm, smooth surface, 100% coverage.