McLaren Tuning Parts — Page 3

McLaren tuning at DD Tuning means model-specific carbon parts for McLaren 540C/570S 2015–2020 and MP4-12C 2011–2014, as well as OEM-design forged wheels for 540C/570S, 650S, 720S, 765LT, Artura, and GT. The website has 7 McLaren model pages; each one features products for that exact model and universal accessories (car care chemicals, car bulbs, universal floor mats).

What carbon parts are available for the McLaren 540C and 570S?

All carbon parts in the McLaren carbon add-ons section are made by DDCarbon; the material listed in the specs is genuine carbon fiber. For 540C/570S there’s a full exterior styling set: two spoilers, side skirts, door-sill covers, a trunk lid cover, a carbon hood, and Flap add-ons for the front bumper.

Before choosing, confirm the modification — compatibility differs across product pages:

• V1 spoiler — for 540C and 570S, coupe and convertible; not suitable for 570GT;
• V2 spoiler — listed in the description for 570S (coupe and convertible);
• side skirts, door-sill covers, and the trunk lid cover — the compatible models also include 570GT;
• Flap add-ons for the front bumper — for 570S and 570GT 2015–2021.

For MP4-12C there is a carbon rear spoiler: fits coupe and Spider models from 2011–2014.

What forged wheels are available for McLaren, and how do the versions differ?

In the McLaren wheels section you’ll find Kabeast Forged forged aluminum wheels in an OEM design, a set of 4 pcs. Almost all sets are staggered: the front wheels are smaller than the rear, just like from the factory. That’s why you select not only the diameter, but also the width and offset (ET) separately for the front and rear axles.

• 720S: V1 and V2 — front 19×9 ET 41,65, rear 20×11 ET 24,75; V3 — ET 29 / ET 9; V4 — ET 32 / ET 19; V3 and V4 are matte black with a machined face.
• 540C/570S: front 19×8, rear 20×10,5 ET 18, gloss black finish.
• 765LT: V1 — 19×9,5 ET 30 and 20×12 ET 27; V2 — 19×9 ET 41,65 and 20×11 ET 24,75.
• Artura: R19/R20 (19×8,5 ET 42, 20×10,5 ET 45) or R20/R21 (20×8,5 ET 36, 21×11 ET 40).
• GT — 19×8 ET 36,65 and 20×10,5 ET 24,75; 650S — 19×9 ET 41,65 and 20×11 ET 24,75.

Where the mounting spec is listed on the product page, it’s PCD 5×112 and a 57,1 mm center bore. The finish (gloss black, matte black, Satin Gunmetal, Satin Silver) is specified in the description of each set.

How do you choose the right tuning parts for your McLaren?

• Open your model page: the model name and years are in the title, and the products there are already filtered.
• For 540C, 570S, and 570GT, match your modification with the compatibility block in the product description — parts differ for coupe, convertible, and GT.
• For wheels, compare the width and ET with your car’s factory wheels, separately for the front and rear axles.
• If your modification isn’t in the model list, send the manager a photo of the car or the VIN — the fitment will be verified before you order.

You can install carbon parts at DD Tuning’s network of certified service centers — the manager will point you to the nearest one.

This description was prepared with the help of AI based on the analysis of over 1 million phone calls between DD Tuning managers and customers, as well as the company knowledge base. We collected the questions customers ask most often and answers proven in practice.