Grille: tuning their own hands

If you are tired of worn-out grille, tuning their hands, about which more will be discussed, can be done quickly, easily and most importantly - cheap. But the result I think will please you.

What do we need?

• A bit of free time.
• Special mesh grille which can be purchased in many online stores tuning.
• Putty and paint materials.
• A little resin and fiberglass.
• Quality hacksaw, pencil or marker.

Grille: the gradual tuning with your hands

1. This vehicle is the grille.
2. With a hacksaw cut the whole middle of the structure, leaving only the outer rim. Then on the inside of the edging you will see a small hole that had served for the fastening of cut mesh.
3. Now take a thin plastic (failing that you can also use ordinary cardboard sheet). Put him inside our design. Note on it with a pencil the width of the frame grid and the length of the contour, then cut along the lines. In other words, we make a mold of that in the future will work. This is the pattern and will be the basis of manufactured mesh.
4. Now we just need to degrease and proshkurit the inner part of the grille. Back insert in it the piece of plastic and put it on top of the resin and fiberglass. These materials need to cover not only a piece of plastic, but grab them part of the frame of the lattice. Fluff all you need 2-3 times to achieve desired thickness and maximum strength and adhesion our items.
5. Let everything dry thoroughly, and then you can detach the plastic base.
6. Now on an uneven surface, apply fiberglass filler and give everything a good proscenium in order to achieve a smooth surface.
7. The last stage is primed, paint, tighten everything purchased by the grid, which is fixed with epoxy resin.

All! As you can see, tuning DIY grille is not complicated and requires minimal time expenditure. If you do not have time for all these manipulations, it is possible to do and easier to buy door grille Mercedes Sprinter or other car of any brand and any manufacturer. All this product available in our store, and the prices are much lower than the competition.