Mercedes Sprinter W907/W910 2018- Front Emblem (OEM)

Description

Front emblem (OEM) — this is the chrome Mercedes star for the front grille of Sprinter W907/W910 (from 2018) made by Davs Auto (Turkey): ABS plastic with chrome plating, outer diameter 20.5 cm, fitment size per the card — 20 cm, mounts into the factory grille position without glue. “OEM” in the name means the size and design of the original emblem, not a part from the Mercedes-Benz factory. One emblem is for sale, package contents — as shown in the card photo.

How to make sure the emblem will fit

• Measure the old star by the outer edge together with the trim ring: it should be 20.5 cm. Emblems of other Sprinter generations are smaller — on W901–W905 the front star is 18 cm, and they are not interchangeable.
• Compare the mounting. The package contents are stated as “see photo”, so compare the back side of the emblem in the card photo with your old part: the number and position of the clips must match. Not sure — send the manager a photo of the mounting seat in the grille.
• If there is a radar behind the emblem (Distronic adaptive cruise control or brake assist), mechanical fitment is not enough: the plastic star must be radar-transparent, and this must be confirmed separately before purchase.

How “OEM” differs from original and other emblems

Davs Auto makes the emblem in the size and geometry of the factory one, but it is an aftermarket equivalent: base — ABS plastic, coating — chrome. A chrome look does not mean metal, and this is normal for grille emblems — plastic is lighter and does not rust. There is no black or matte version for W907 on this page: the item is chrome only. After replacing the grille with a tuning grille, the factory emblem often does not fit the mounting — then the star is selected for the grille that is actually installed, not for the vehicle year.

How to replace the emblem

1. Remove the old star: depending on the condition of the clips — by removing the grille or by carefully unclipping the tabs from the back side.
2. Clean the mounting seat from dirt and remnants of old fasteners.
3. Insert the new emblem into the factory position and press until it locks. No drilling or gluing is required.
4. Remove the protective film only after installation — scratches on the film are not a defect of the coating.

What else is available for the front of Sprinter W907/W910

If you are replacing more than just the star, for this body the catalog has grille trims (5 pcs, stainless steel), radiator grille trim (metal, black) and front grille Panamericana GT Black; for the hood — EuroCap hood deflector. All badges for this body — on the page Sprinter W907/W910 badges, the rest of the accessories — on the page Mercedes Sprinter W907/W910 from 2018.

Description prepared with the help of AI based on the analysis of over 1 million phone conversations between DD Tuning managers and customers and the company’s knowledge base. We collected the questions customers ask most often and answers verified in practice.