Author: Radomskyi Maksym VasyliovychCar stickers test round popularity. They fell in love with his enviable motorists to wear, colorful, huge range of different sizes. The possibilities of modern technologies minimize the time required for installation accessory. With minimal experience, accuracy, attentiveness, you can stick to. But if you are unsure of the end result, or the subject of tuning quite a decent size, refer to the masters.
The most easy to install adhesive stickers provided with the surface.
Consider the stages of their error-free installation.
- Prepare the application surface, thoroughly washing the dust residues. If appropriate use chemical solutions, they require careful removal of clean water.
- Full drying pasted over surface. Even small residual moisture will degrade the wear caused by tuning.
- Degreasing can not miss. Dry surface wipe alcoholic tincture, gasoline and wait until complete evaporation degreaser.
- Carefully Gaugeable accessory applying to the car. Places upper corners labeled waterproof coloring veschestvom.5
- Slowly otslaivaya paper substrate at a minimum angle slowly glue.
- From the middle of the product with a scraper (plastic card) squeezing the remaining air. This is an important point, bubbles must not remain.
- In most cases labels are laminated surface that is wiped with a dry cloth.
It is important not to miss three things:
- Keep the temperature. You can not start the process, ate the thermometer fell below 5 g. Celsius.
- During the day the label must remain dry, it should not fall detergents.
- With an uneven surface, start from the middle of prikatyvat. The edges, which will go over bumps, leave last. Suppose you will appreciate the result, and your iron friend for a long time tuning adorns.
This material was prepared using AI tools for topic research, structuring and initial draft creation. Fact-checking, editing, expert review and final approval were performed by Maksym Vasyliovych Radomskyi.
